Skip to content

How To Connect Pvc To Cast Iron Pipe Underground

PVC (polyvinyl chloride) and cast iron pipes are two of the most common types of piping used in homes today. PVC is a plastic pipe that is relatively inexpensive, easy to install, and resists corrosion. Cast iron pipes are made of metal and are more durable than PVC, but also more expensive. PVC and cast iron pipes can be connected together using a coupling connector. The connector is inserted into the end of each pipe and then tightened with a wrench.

How To Connect Pvc To Cast Iron Pipe Underground

When connecting PVC pipe to cast iron pipe underground, it is important to use a coupling that is specifically designed for this type of connection. A standard PVC coupling will not be strong enough to withstand the pressure of the cast iron pipe, and could potentially burst. There are two types of couplings that can be used for this type of connection: a rubber coupler or a mechanical coupling. The rubber coupler is the simplest and most common type of coupling, and it simply slips over

-PVC pipe -Cast iron pipe -Tape measure – hacksaw -PVC cement – Primer – Hacksaw blade

  • Measure and mark where the cast iron pipe will be cut
  • Use a hacksaw to cut the pvc pipe to the desired length
  • Apply primer to both ends
  • Cut the cast iron pipe using a hacksaw

– Dig a trench for the pipe – the depth should be at least twice the diameter of the pipe plus 18 inches. – Use a pipe cutter to cut the PVC to the desired length. – Apply primer to the end of the PVC and then cement. – Insert the PVC into the cast iron pipe and hold in place until the cement dries.


Frequently Asked Questions

What Happens To Cast Iron Pipes Over Time?

Cast iron pipes corrode and rust over time, which can cause blockages in the pipe. The rust can also flake off and get into the water system, which can be dangerous.

How Long Does It Take For Cast Iron Pipes To Corrode?

Cast iron pipes corrode over time as a result of the electrochemical reaction between iron and oxygen in the presence of water. The rate of corrosion depends on a number of factors, including the composition and properties of the pipe material, the pH and water chemistry, and the environmental conditions. In general, however, cast iron pipes can corrode relatively quickly, often within 10 to 20 years.

How Long Does Ductile Iron Pipe Last?

Ductile iron pipe typically lasts around 50 years, but this lifespan can be extended with proper maintenance.

Which Pipe Is Best For Underground Drainage?

The best pipe for underground drainage is a PVC pipe.

How Long Will Cast Iron Pipe Last In The Ground?

Cast iron pipe will last indefinitely in the ground if it is properly installed and maintained.

Does Cast Iron Pipe Corrode?

Yes, cast iron pipe corrodes over time. This can cause decreased water flow and even complete blockages.

Can Cast Iron Pipe Be Used Underground?

Cast iron pipe can be used underground, but is not as common as PVC or metal piping. Cast iron is susceptible to corrosion and may not be the best option for long-term underground use.


In Summary

To connect PVC to cast iron pipe underground, use a coupling fitting. The coupling fitting will have a threaded end that screws into the cast iron pipe, and a smooth end that slides over the PVC pipe. Apply PVC primer and glue to the end of the PVC pipe, then screw the coupling fitting into place.

Leave a Reply

Your email address will not be published. Required fields are marked *