Skip to content

How To Connect Two Rain Barrels Together

Rain barrels are a great way to collect rainwater runoff from your roof for later use, such as watering plants or your garden. By connecting two rain barrels together, you can store even more water! Here is a guide on how to connect two rain barrels together.

How To Connect Two Rain Barrels Together

The best way to connect two rain barrels together is by using a downspout diverter. A downspout diverter is a device that connects to a rain barrel and directs the water from the downspout into the rain barrel. This allows you to collect the water from two or more downspouts and connect them to one rain barrel.

garden hose, T-connector, hose clamps

  • If using two rain barrels of differing sizes, use a connector that fits the outlet on both barrels
  • Place the connector
  • Using a hose, connect the spigot of one rain barrel to the spigot of the other

-The two rain barrels should be the same size -The rain barrels should be placed close to each other, with the overflow pipe from one connecting to the inlet pipe of the other -The two rain barrels should be elevated above the ground, either on cinder blocks or a platform


Frequently Asked Questions

How Do You Chain A Rain Barrel?

You chain a rain barrel by attaching it to a downspout on your roof. The barrel will catch the water as it rains and then you can use that water to irrigate your garden or lawn.

How Do You Make A Double Rain Barrel?

To make a double rain barrel, you need two 55 gallon drums, a spigot, Teflon tape, PVC pipe cutter, and PVC cement. Cut the PVC pipe to fit your spigot and drill a hole in the bottom of each drum. Seal the holes with Teflon tape and then use PVC cement to attach the spigot to the drum. Finally, cut a hole in the top of one drum and fit the other drum on top so that the water drains into it.

How Do You Link Water Barrels Together?

You can link water barrels together by drilling a hole in the side of each barrel and using a metal pipe to connect them.

How Do You Connect Multiple Rain Barrels?

You can connect multiple rain barrels in a few ways. One way is to use a Y connector to join the barrels together. Another way is to use a downspout diverter to send the water from the roof to one or more barrels.

How Do You Connect One Water Butt To Another?

You would need to connect the water butt using a hose.

How Do You Attach A Rain Chain?

Rain chains are a type of decorative rain gutter that are used to divert water away from a building. They are typically made of metal or copper and can be attached to the roof or gutters in a variety of ways.

How Do You Link Water Butts?

There are a few ways to link water butts. One way is to use a Y-splitter to connect two butts together. Another way is to use a T-splitter to connect three butts together. Finally, you can use a hose connector to join two or more butts together.

How Do You Cascade A Rain Barrel?

Cascade a rain barrel by using a downspout from your roof to direct the water into the barrel. The barrel should be elevated above the ground on a stand or platform, with a spout that allows you to direct the water where you need it.

How Do You Transfer Water From One Barrel To Another?

You can transfer water from one barrel to another by using a pump or siphon.

Can You Connect Rain Barrels?

Yes, rain barrels can be connected to create a larger water catchment area. This will help to store more water during rainfall events, which can then be used to irrigate plants or gardens. It is important to ensure that the rain barrel system is properly sealed and that the connecting hoses are leak-proof to avoid any water wastage.

How Do You Daisy Rain Barrel?

A daisy rain barrel is a DIY rain barrel made from a 55-gallon plastic drum that has been cut in half and drilled with dozens of holes. The barrel is then filled with soil and planted with flowers, such as daisies, that will grow up and over the top of the barrel, creating a natural filter for the water that collects in the barrel.


In Summary

If you want to connect two rain barrels together, you can use a connector kit. This kit includes a T-fitting, a hose adapter, and two hose clamps. First, install the T-fitting into the bottom of each rain barrel. Then, attach the hose adapter to one end of the T-fitting and the hose clamps to the other end. Finally, connect the hoses and tighten the clamps.

Leave a Reply

Your email address will not be published. Required fields are marked *