Skip to content

How To Cut Cast Iron Pipe With A Sawzall

Cast iron pipe can be cut with a sawzall by using a metal cutting blade. The blade should be inserted into the pipe so that the teeth are facing the front of the saw. The saw should then be turned on and pulled towards the front of the pipe to cut through it.

How To Cut Cast Iron Pipe With A Sawzall

Cast iron pipe is a durable and reliable plumbing material, but it can be difficult to cut. A sawzall is the best tool for the job, but there are a few things to keep in mind. First, make sure your sawzall is equipped with a metal-cutting blade. The blades are typically blue and have teeth that are designed for cutting through metal. If you’re not sure which blade to use, check the sawzall’s owners manual or contact the

– A sawzall – Cast iron pipe – Safety goggles – Dust mask – Ear plugs – Gloves

  • Put on gloves and other personal protective gear insert the sawzall blade into the pipe at
  • Measure and mark the pipe where you will be making your cut
  • Identify the section of cast iron pipe you need to cut

on ‘cutting cast iron pipe with a sawzall’ – To cut a cast iron pipe with a sawzall, you will need: – Sawzall – Pipe cutter – Safety goggles – Gloves – Protective clothing – Pry bar – Chisel – Hammer – Vise grips – Wedge – Taps and dies set


Frequently Asked Questions

Can You Cut Cast Iron With A Metal Sawzall Blade?

Yes, you can cut cast iron with a metal sawzall blade. Cast iron is a relatively hard material that can be cut with a metal sawzall blade. However, you may need to use a slower cutting speed and more pressure when cutting cast iron with a metal sawzall blade in order to achieve a clean cut.

Can You Cut A Cast Iron Tub With A Reciprocating Saw?

It is possible to cut a cast iron tub with a reciprocating saw, but it is not recommended. The saw blade can get stuck in the tub and cause injury.

Will A Sawzall Cut Cast Iron?

A sawzall will cut cast iron, but it will take a little more time and effort than if you were using a wood saw.

What Kind Of Sawzall Blade Do I Need To Cut Cast Iron?

Cast iron is a tough material to cut, so you’ll need a sharp, durable sawzall blade to get the job done right. Look for a blade with high-quality carbon steel construction and aggressive teeth that can easily slice through thick materials.

What Is Best To Cut Cast Iron?

There are a few different ways that you can cut cast iron. One way is to use a hacksaw. Another way is to use a grinder.

What Is The Best Thing To Cut Cast Iron Pipe With?

The best way to cut cast iron pipe is with a reciprocating saw fitted with a metal-cutting blade.


To Summarize

Cast iron pipe can be cut with a sawzall by using a metal-cutting blade. The sawzall should be set to a slow speed and the pipe should be clamped in place to avoid movement. The blade should be inserted into the pipe and then pulled backwards while pushing forward to create the cut.

Leave a Reply

Your email address will not be published. Required fields are marked *