Skip to content

How To Hang Curtains On Top Of Vertical Blinds Diy

If you want to hang curtains on top of vertical blinds, you will need to remove the vertical blinds first. Next, measure the width and height of your window and cut your curtain rods to size. Then, use a drill to make small holes in the wall near the top of your window frame and insert the curtain rods. Finally, hang your curtains on the rods and enjoy your new window treatment!

How To Hang Curtains On Top Of Vertical Blinds Diy

There are a few ways to hang curtains on top of vertical blinds. One way is to use a tension rod between the vertical blinds and the window frame. Another way is to use a curtain rod and rings, and slide the rings onto the vertical blinds slats.

-Curtain rods (length depends on the size of your window) -Screws or nails -Vertical blinds -Tape measure -Pencil -Level -Stud finder (optional)

  • Drill holes into the wall at each mark insert screws into the holes and hang the curtain rod
  • Measure and mark the desired height of the curtain rod on the wall
  • Remove the vertical blinds from the window

-Measure the width of the window opening and add six inches to both the height and the width. This will give you the total amount of fabric needed for the curtains. -Cut the fabric to size and hem the bottom and top edges. -Hang a curtain rod at the top of the window opening, and hang the curtains on the rod. -If desired, pin or tack the curtains to the top of the vertical blinds for extra support.


Frequently Asked Questions

How Do You Hang Curtains On Top Of Blinds?

There are a few ways to hang curtains on top of blinds. One way is to use curtain clips, which can be attached to the top of the blinds. Another way is to use a tension rod, which can be inserted between the blinds and the window frame.

Is There A Way To Put Up Curtains Without Drilling Holes?

There are a few ways to put up curtains without drilling holes. One way is to use curtain hooks that attach to the top of the window frame. Another way is to use tension rods, which attach to the top of the window frame and hold the curtains in place with tension.

How Do You Hang Curtains Over Blinds Without Drilling?

There are a few ways to hang curtains over blinds without drilling. One way is to use curtain clips or rings and attach them to the top of the blinds. Another way is to use a tension rod, which can be placed across the top of the window and will hold the curtains in place.

How Do You Hang Curtains Over Blinds?

You can hang curtains over blinds by using curtain hooks. You will need to measure the width of the window and then purchase curtains that are the same width or slightly wider. The curtains will be hung from the curtain hooks on the top of the window frame.

Can You Hang Curtains Over Vertical Blinds?

It is possible to hang curtains over vertical blinds, but it may not be the most aesthetically pleasing solution. Curtains can help to soften the look of vertical blinds and add a touch of personality to the room. However, it is important to make sure that the curtains are hung properly so that they do not bunch up or fall down.

How Do You Hang Curtains Over Curtains?

You can hang curtains over curtains by using drapery hooks or curtain rings. You will need to measure the distance between the top of your curtain rod and the bottom of your curtain. Add 6-8 inches to this measurement. Cut two pieces of fabric to this length and hem the edges. Attach drapery hooks or rings to the top of each piece of fabric, and then hang them on your curtain rod.

How Can I Hang Curtains Without A Stud Finder?

You can hang curtains without a stud finder by using a piece of wire. First, measure the width of your window and then add two inches to that number. Cut a piece of wire that length. Next, use a tape measure to find the height of your window and then add 12 inches to that number. Cut another piece of wire that length. Twist the two pieces of wire together to form a loop. Hang the loop on the curtain rod and then use a hammer to poke a hole in the wall where you want the curtain rod to go. Put the curtain rod through the hole in the wall and into the loop on the wire.

How Do You Hang Two Curtains Over A Rod?

There are a number of ways to hang curtains over a rod. One is to use hooks on the back of the curtain and place them over the rod. Another way is to sew loops onto the top of the curtain and use a ring to hold it up.

How Do You Find Studs In Wall With Curtains?

One way to find studs in a wall behind curtains is to use a stud finder. This is a tool that emits an electronic signal that detects the presence of a metal stud. Another way to find studs is to use a hammer and a screwdriver. Tap the wall with the screwdriver until you hear a solid sound. Then, use the hammer to drive a nail into the wall at that spot. If the nail goes in easily, there is probably no stud there. If the nail is difficult to drive in, there is likely a stud behind the wall.

Do You Need Stud Finder For Curtain Rod?

A stud finder is not necessary for hanging a curtain rod, but it can be helpful. If the curtain rod is heavy, it is important to use a stud to ensure that the rod will be securely attached to the wall.

How Do You Fit Two Curtains On One Rod?

There are a few ways to fit two curtains on one rod. One way is to have the curtains overlap, so that the top of one curtain is slightly above the bottom of the other curtain. Another way is to use tiebacks to hold the curtains back from each other, so that there is more space between them.

Can You Hang Curtains With Command Strips?

Yes, you can hang curtains with Command Strips.

How Do I Put Two Layers Of Curtains Together?

There are various ways to do this, but one way is to sew a casing along the top edge of the bottom curtain, and then thread the top curtain through the casing. You can also use Velcro or hooks and eyes to attach the curtains together.


In Summary

Hanging curtains over vertical blinds can be a bit tricky, but it can be done. First, measure the width of the window and subtract about 4 inches from that number. This will be the width of your curtain rod. Next, measure the height of the window and subtract about 4 inches from that number. This will be the length of your curtain rod. Finally, purchase a curtain rod that is this length. To hang the curtains, first remove the vertical blinds. If they are attached to the window frame with screws, remove them and set them aside. If they are attached with clips, unhook them and set them aside. Next, insert one end of the curtain rod into the bracket on the wall

Leave a Reply

Your email address will not be published. Required fields are marked *