Skip to content

How To Remove Old Solder From Copper Pipe

Removing old solder from copper pipe can be a difficult and tedious process. There are a few different methods that can be used, but the most common is to use a propane torch. First, the solder must be heated until it is liquid. Then, the pipe can be gently tapped with a hammer until the solder pops off. Finally, the area can be cleaned with sandpaper or a wire brush.

How To Remove Old Solder From Copper Pipe

Removing solder from copper pipe can be a difficult task. There are a few ways that can be used to remove the solder, but the most common way is to use a soldering iron. The soldering iron is heated up and then placed on the solder. The heat will cause the solder to melt and it can then be removed from the copper pipe. If there is any remaining solder on the copper pipe, it can be removed using a wire brush.

-Some basic tools including a wire brush, flux, solder, and a propane torch -copper pipe cleaner

  • Soak a cloth in the remover and apply it to the solder
  • Let the remover work on the solder
  • Use a solder remover or flux remover to remove the old solder from the copper pipe

-Use a wire brush to remove any loose solder from the copper pipe. -Apply flux to the copper pipe and use a soldering iron to heat the solder until it liquefies. -Wait for the solder to cool and then use a wire brush to remove the remaining flux.


Frequently Asked Questions

How Do You Remove Old Solder From Copper?

One way to remove old solder from copper is to apply a flux to the area, and then use a soldering iron to heat the solder and pull it away from the copper.

How Do You Unsweat Copper?

The most common way to unsweat copper is to use a vinegar and salt mixture.

How Do You Remove Old Solder?

Removing old solder can be done with a few different methods. One way is to use a solder remover, which is a chemical that will dissolve the solder. Another way is to use heat and a tool called a desoldering pump.

How Do I Remove A Stubborn Solder Copper Pipe?

There are a few ways to remove a stubborn solder copper pipe. One is to use a propane torch to heat the pipe until the solder melts. Another is to use a copper pipe bender to break the solder free.

How Do You Remove Solder Without Wick Or Flux?

There are a few ways to remove solder without flux or wick. One way is to use a desoldering pump. Another way is to use a desoldering braid.

How Do You Loosen Old Copper Pipe Fittings?

There are a few ways to loosen old copper pipe fittings. One is to use a pipe wrench, which should fit the fitting snugly. Another is to use a propane torch to heat the fitting and then use a pipe wrench. Finally, a hacksaw can be used to cut the fitting off.

How Do You Remove Old Solder That Won’T Melt?

If the solder will not melt, you can try to remove it using a soldering iron with a small chisel-like tip. You can also try using a rotary tool with a small wire brush attachment.


In Closing

Removing old solder from copper pipe can be a difficult process. There are a few methods that can be used to remove the solder, but each method has its own set of risks and benefits.

Leave a Reply

Your email address will not be published. Required fields are marked *